Seawater Pump With Energy Recovery Type SWPE

The Danfoss SWPE is a high-efficiency energy recovery unit for reverse osmosis filtration of sea water. Energy recovery is achieved by feeding high-pressure brine from membranes into the recovery device (APM) that converts the energy in the pressurized brine into mechanical energy for reuse by the electric motor.

Design:

The SWPE energy recovery unit consists of an APP pump and an APM motor, both connected to a double-shafted electric motor.The permeate flow and recovery rate depend on the difference between the size of an APP and an APM, as they have a fixed volumetric displacement.

Energy recovery is obtained when high-pressure brine from the membranes is fed to the APM that converts the energy in the pressurized brine to mechanical energy to be re-used by the electric motor. As the APM has a fixed volumetric displacement, the recovery rate will be fixed.

Capacity:

SWPE are available in sizes from 4-30 m3/day with recovery rates between 29-32%. Other sizes are available upon request.

For the complete range of Danfoss SWPE Salt Water Pumps go to our dedicated website: High Pressure Water Equipment - SWPE Pumps

 

APP pump / APM motor  APP1.0/APM0.8 APP1.5/APM1.2 APP1.8/APM1.2 
1450 rpm         
Code number    180B8000  180B8002  180B8004 
Feed flow  m3/h (gpm)  0.50 (2.2)  0.80 (3.5)  0.85 (3.7) 
Recovery rate  29 28 32
Permeate (± 10%)  m3/h (gpm)  0.14 (0.6)  0.22 (1.0)  0.27 (1.2) 
Electric motor (4 poles)    1.1 kW, IEC 90  1.5 kW, IEC 90  1.5 kW, IEC 90 
2900 rpm         
Code number    180B8001  180B8003  180B8005 
Feed flow  m3/h (gpm)  1.05 (4.6)  1.55 (6.8)  1.65 (7.3) 
Recovery rate  29 28 32
Permeate (± 10%)  m3/h (gpm)  0.30 (1.3)  0.43 (1.9)  0.52 (2.3) 
Electric motor (2 poles)    2.2 kW, IEC 90  3 kW, IEC 100  3 kW, IEC 100 
         
APP pump / APM motor  APP2.5/APM2.0 APP2.5/APM1.8   
1450 rpm         
Code number    180B8006  180B8008   
Feed flow  m3/h (gpm)  1.25 (5.5)  1.25 (5.5)   
Recovery rate  29 32  
Permeate (± 10%)  m3/h (gpm)  0.36 (1.6)  0.40 (1.8)   
Electric motor (4 poles)    2.2 kW, IEC 100  2.2 kW, IEC 100   
2900 rpm         
Code number    180B8007  180B8009   
Feed flow  m3/h (gpm)  2.55 (11.2)  2.55 (11.2)   
Recovery rate  29 32  
Permeate (± 10%)  m3/h (gpm)  0.74 (3.3)  0.82 (3.6)   
Electric motor (2 poles)     
If other flow or recovery rate is required, please contact M & M Controls.
* For this combination, please contact M & M Controls. 
Seawater Pump With Energy Recovery Type SWPE
Please call +44 (0)1772 699 999 or email [email protected] for current price.